Oil timber work with Cedar Oil approximately every three months, by applying a very small amount of oil to the timber and rubbing in the direction of the grain with the white pad. This is to remove any build-up of material on the timber surface.

Allow the oil to soak in for around 15 minutes then remove all surface oil with a clean soft cloth, always wiping in the direction of the grain. It is very important that surface oil is totally removed.

The stainless steel is 316 marine grade, polished to provide a grain to the surface. Oil the stainless steel and wipe off as stated for timber work.

Think good thoughts about the beautiful fine timber while polishing your table and you shall be rewarded with generations of happy dining.